What is the Transmission Fluid Capacity for a 1994 Ford Explorer?
The Ford Explorer transmission fluid capacity for the 1994 model is 13.7 liters (14.5 quarts).
1994 Ford Explorer Transmission Fluid Capacity
The 1994 Ford Explorer has a four-speed automatic transmission that requires 4.0 quarts of automatic transmission fluid for proper maintenance. As with any vehicle, the exact transmission fluid requirements must be followed to ensure optimal engine performance and the longevity of the transmission components. Regular maintenance and oil changes are vital to help ensure your Explorer’s transmission keeps running smoothly and efficiently. Keep reading to learn more about what kind of fluid to use in your Ford Explorer, how often this type of service should be done and additional tips for prevention and care.
The Ford Explorer is a mid-size SUV that was first introduced in 1991 as a replacement for the Ford Bronco II. Since then, the Explorer has become one of the most popular vehicles in the United States and has been produced for a total of five generations. It is currently offered in two-door and four-door models, as well as with either a V6 or V8 engine depending on the model year.
The 1994 Ford Explorer was available with either a 4.0L V6 or 5.0L V8 engine. The 4.0L V6 had a 3-speed automatic transmission, while the 5.0L V8 had a 4-speed automatic transmission. All models of the 1994 Ford Explorer had rear-wheel drive and an independent front suspension with coil springs and stabilizer bars.
Transmission Fluid Capacity
The recommended transmission fluid capacity for the 1994 Ford Explorer is 8 quarts for both automatic transmissions (4-speed or 3-speed). It is important to note that this capacity may vary depending on certain vehicle conditions, such as if any additional filters have been added to the transmission system or if any other modifications have been made to it.
The 1994 Ford Explorer requires unleaded gasoline with an octane rating of 87 or higher for proper performance from its engine. For optimal fuel economy, it is suggested to use premium unleaded gasoline with an octane rating of 91 or higher. The recommended oil type for this vehicle is 10W30 motor oil, which should be changed every 3,000 miles or every 12 months (whichever comes first).
Capacity by Model Year
The transmission fluid capacity for a 1994 Ford Explorer varies depending on the model and which transmission system it is equipped with. For the standard model Explorer, which was equipped with a 4-speed automatic transmission, the recommended capacity is 12 quarts. For an Explorer equipped with a 5-speed automatic transmission, the recommended capacity is 13.5 quarts.
Standard Capacity Requirements
It is important to note that these capacities are only required if all of the fluid has been drained from the transmission and a complete fill of fresh fluid is necessary. When performing less extensive draining and filling procedures, such as when changing the filter or replacing a component within the transmission, it will typically require 6 to 8 quarts of fresh fluid to replace what has been drained out. It is also important to use only manufacturer-approved fluids when refilling an automatic transmission as this will ensure proper lubrication and performance of all moving components within the system.
FAQ & Answers
Q: What is the history of the Ford Explorer?
A: The Ford Explorer is a mid-size sport utility vehicle (SUV). It was first introduced in 1990 for the 1991 model year and is currently in its fourth generation. Over its lifetime, it has been offered in a variety of body styles, including two-door, four-door and five-door configurations. It was also available with rear-wheel or four-wheel drive.
Q: What are the specifications of the 1994 Ford Explorer?
A: The 1994 Ford Explorer was powered by a 4.0L V6 engine that produced 160 horsepower and 220 lb.-ft. of torque. It had a 4-speed automatic transmission with overdrive and either rear-wheel or four-wheel drive. The vehicle had a towing capacity of 3500 lbs., a fuel tank capacity of 18 gallons, and measured 188 inches long, 72 inches wide and 71 inches high with a wheelbase of 112 inches.
Q: What is the transmission fluid capacity for the 1994 Ford Explorer?
A: The transmission fluid capacity for the 1994 Ford Explorer is 8 quarts (7.6 liters).
Q: What type of transmission fluid is required for the 1994 Ford Explorer?
A: The type of transmission fluid required for the 1994 Ford Explorer depends on whether it has an AX4S or AXOD transmission. If it has an AX4S, it requires Mercon Automatic Transmission Fluid; if it has an AXOD, it requires Mercon V Automatic Transmission Fluid.
Q: How often should I change my transmission fluid in my 1994 Ford Explorer?
A: Your owners manual will have specific recommendations for how often you should change your transmission fluid; however, as a general rule its recommended to change your transmission fluid every 30,000 to 60,000 miles (48,280 to 96,560 km).
The transmission fluid capacity for a 1994 Ford Explorer is approximately 7.5 quarts. It is important to use the correct type of fluid and check the fluid level regularly to ensure proper operation of the transmission. Additionally, if you are unsure which type of fluid to use, consult your owner’s manual or a professional mechanic for advice.