How to Reset the Change Transmission Fluid Light on a 2012 Chevy Captiva

To reset the ‘Change Transmission Fluid’ light on a 2012 Chevy Captiva, press and hold the ‘Trip’ button until the light turns off.

2012 Chevy Captiva Change Transmission Fluid Light Reset

The 2012 Chevy Captiva has an oil light indicator that needs to be reset periodically. Resetting this light requires a few steps to complete, but doing so ensures that your vehicle is operating correctly. This guide will provide an overview of the process required to change the transmission fluid and reset the oil light indicator. With just a few minutes of your time, you’ll be able to keep your 2012 Chevy Captiva running smoothly and efficiently.

Description of 2012 Chevy Captiva

The 2012 Chevy Captiva is a mid-sized SUV that was first released in 2006 by Chevrolet, as a replacement for the Blazer. It was initially available in Europe and later made its way to North America. It is powered by either a 2.4-liter four-cylinder engine, or a 3.0-liter V6 engine, depending on the trim level. The Captiva comes with either two or four wheel drive and has seating for five or seven passengers, depending on the version.

Transmission Fluid

Transmission fluid is an important part of any vehicle’s maintenance routine. The transmission fluid keeps the moving parts in the transmission lubricated and cool, preventing wear and tear on the components. Over time, the transmission fluid can become contaminated with dirt and grime, which can cause it to lose its effectiveness. It’s important to regularly check and change the transmission fluid in your 2012 Chevy Captiva to ensure it is performing at optimal levels, otherwise you may experience problems such as hard shifting or slipping gears.

Resetting Change Transmission Fluid Light

When it’s time to change your transmission fluid, a light will appear on your dashboard letting you know that it needs to be done. If this light doesn’t go away after you have changed the fluid then you may need to reset it manually. To do this, you’ll need access to the OBDII port which is located under the driver’s side dash near the steering column. Once connected, you should be able to access the service menu where you can reset the light and turn it off once again.

How To Change Transmission Fluid

Changing your transmission fluid is not a difficult task but it does require some attention to detail when doing so. First off, you’ll need to locate your vehicles drain plug which is usually located underneath your vehicle near where the transmission connects with your engine block or drivetrain components. Once located you’ll need a wrench or socket set depending on what type of drain plug your vehicle has in order for you to remove it and drain out all of the old oil from within your transmission case into an appropriate container below it (a large bucket works best). Once all of the old oil has been drained out then refill with new oil using a funnel or other suitable device until full (check owners manual for exact amount). Finally replace drain plug back into place securely using wrench/socket set and dispose of old oil appropriately according to local laws/regulations in regards to hazardous waste materials disposal requirements before starting vehicle up again for operation as normal with new oil inside of transmission system now instead of old one previously used before draining out earlier during process just completed by yourself now finished successfully!


The 2012 Chevy Captiva is an SUV manufactured by General Motors. It is equipped with a six-speed automatic transmission and offers a variety of features for its drivers. The transmission fluid light on the dashboard indicates when it’s time to change your transmission fluid. In this article, we’ll explain how to reset the transmission fluid light on your 2012 Chevy Captiva.

Checking Your Transmission Fluid Level

Before resetting the transmission light, it is important to check your transmission fluid level. To do this, you will need to locate the dipstick, which is usually found at the rear of the engine bay near the front of the vehicle. Once you have located it, pull it out and wipe off any excess oil or dirt that may be present on it. Then reinsert it into its slot and pull it back out again. You should now be able to see how much transmission fluid is in your vehicle by looking at the markings on the dipstick. If your vehicle has too little or too much transmission fluid, you should top it up or drain some out before resetting the light.

Resetting The Transmission Fluid Light

Once you have checked your transmission fluid level and ensured that it is within tolerance levels, you are ready to reset the light. To do this, simply turn off your engine and wait for at least 10 minutes before starting it again. This will allow enough time for any residual pressure in the system to dissipate and will ensure that all systems are properly reset when you restart your vehicle. After starting your engine again, check that all warning lights on the dashboard have gone off before driving away as normal.


Resetting a transmission fluid light on a 2012 Chevy Captiva is a relatively straightforward process that requires only a few minutes of time and minimal effort. By following these steps carefully and ensuring that all safety measures are taken seriously, you can easily keep your vehicle in top condition and enjoy many years of safe driving with minimal problems related to its performance or maintenance requirements.

FAQ & Answers

Q: How do I reset the transmission fluid change light on my 2012 Chevy Captiva?
A: To reset the transmission fluid change light on your 2012 Chevy Captiva, first switch off the ignition and open the hood. Locate the transmission dipstick, which is usually located near the front of the engine. Pull out the dipstick and check that it is dry. If it is wet, there may be a leak in your transmission system and you should have it serviced immediately. Once you have verified that there are no leaks, start your engine and let it run for several minutes until it reaches normal operating temperatures. Then locate the small button near the dipstick and press it until you hear a beep sound indicating that the reset has taken place.

Q: What type of transmission fluid should I use in my 2012 Chevy Captiva?
A: Your 2012 Chevy Captiva requires Dexron VI Automatic Transmission Fluid or equivalent to be used in its transmission system. Make sure to check your owners manual for any additional specifications or requirements for your specific model before using any type of automatic transmission fluid.

Q: When should I change my transmission fluid?
A: Generally speaking, most manufacturers recommend changing your car’s automatic transmission fluid every 30,000 miles or every two years, whichever comes first. However, make sure to consult with your owners manual or service department to get exact recommendations for your individual vehicle’s needs.

Q: What kind of problems can occur if I don’t change my transmission fluid regularly?
A: If you fail to regularly change your vehicle’s automatic transmission fluid, it can lead to several issues such as reduced fuel economy, difficulty shifting gears and even complete failure of components within the system due to lack of lubrication. Regularly changing your vehicle’s automatic transmission fluid prevents these types of issues from occurring and keeps your car running smoothly for longer periods of time.

Q: Are there any other maintenance tips that I should keep in mind when dealing with my 2012 Chevy Captivas transmission system?
A: In addition to regularly changing out the automatic transmission fluid as recommended by your service department or owners manual, make sure to also keep an eye out for any leaks coming from around the dipstick or other components within this system as well as any strange noises such as whining or grinding while shifting gears which may indicate a more serious issue with internal parts within this system.

The 2012 Chevy Captiva requires a two-step process to reset the transmission fluid light. First, turn the key in the ignition and press and hold the gas pedal for fifteen seconds, then turn off the engine and wait five minutes. Finally, turn the key in the ignition to start the engine and release the gas pedal. This will reset the transmission fluid light on your 2012 Chevy Captiva.

Similar Posts