How to Fix 2016 Ram Cruise Control Issues: Troubleshooting Guide

The 2016 Ram may have an issue with its cruise control system that needs to be corrected by a professional mechanic.

2016 Ram Cruise Control Not Working

Cruise control is an automized system on cars that helps maintain a steady speed so that drivers don’t have to constantly adjust the accelerator. In 2016, owners of newer Ram vehicles were having an issue with their cruise control not working properly. This issue is due to several malfunctions such as deactivated cruise control switches, faulty speed sensors, electrical connection problems and worn out parts etc. It can sometimes be difficult to distinguish the exact source of the malfunction and professional assistance is recommended in such cases. Fortunately, many of these issues can be solved after a diagnosis and possible replacement of defective components. With some effective troubleshooting steps and timely repairs, you can make sure your vehicle’s cruise control system is working as it should.

Understanding Cruise Control Not Working

Cruise control is a system found in many modern cars that allows the driver to set a desired speed and maintain it without having to manually accelerate or brake. It can be a great help when driving on long stretches of road, but when it stops working it can be quite frustrating. In this article, we will look at some of the common causes of cruise control not working, as well as some of the tools and techniques needed to diagnose and repair the problem.

Causes of Cruise Control not Working

The most common cause of cruise control not working is faulty electrical connections. When these connections become loose or corroded they can prevent the system from functioning correctly. Additionally, if any of the sensors related to the cruise control system are malfunctioning or out of calibration, then this can also cause issues. This includes sensors such as the accelerator pedal position sensor (APPS) and throttle position sensor (TPS).

Troubleshooting to Fix the Problem

In order to diagnose and fix any problems with your cruise control system, you will need some basic tools such as a multi-meter tester tool or volt-ohm meter. Additionally, having access to your car’s maintenance manual can also be very helpful when troubleshooting any issues with your cruise control system. Some of the steps involved in troubleshooting include verifying that all electrical connections are secured properly and inspecting both the RPMs and accelerator cables for signs of wear or damage.

Tools Needed for Diagnosis & Replacement

If you find that any parts need to be replaced in order to get your cruise control system working again, then you will need some additional tools such as screwdrivers, wrenches, and other small hand tools. Additionally, if you are replacing any sensors such as those mentioned above then you may also need special diagnostic equipment in order to ensure they are calibrated correctly.

Sensors that May be Faulty for Ram 2016 Model

When dealing with cruise control problems on a 2016 Ram model vehicle there are two main sensors that may be at fault; these include the accelerator pedal position sensor (APPS) and throttle position sensor (TPS). Both of these components play an important role in how your car’s engine functions so it is important to make sure they are functioning correctly before attempting any repairs on your own.

Engine Will Need to be Inspected & Tuned Up

In addition to checking all electrical connections and sensors related to your car’s cruise control system, it is also important to make sure that your engine is functioning properly as well. This includes checking for faulty spark plugs or ignition cables as well as inspecting for vacuum leaks in hose connections or intakes. If any of these components are malfunctioning then this could prevent your car’s engine from running optimally which could affect how well your cruise control works in turn. Depending on what type of vehicle you have, performing a tune-up may also be necessary in order to get everything running smoothly again.

Fuses that Might be Defective

The 2016 Ram Cruise Control system might not work if the fuse or relay for the fuel pump and detonation is defective. It is important to inspect these fuses and relays to ensure that they are functioning properly. If either of them is found to be defective, they should be replaced immediately.

Replacing the Parts Require Professional Help

If the problem with the 2016 Ram Cruise Control system persists, then it may be necessary to replace certain parts. This can include replacing the throttle position sensor (TPS), air pressure/position sensors (APPS) and idle air control solenoid. These replacements should only be done by a professional since they involve complex electrical wiring and circuitry.

Software Updates Recommended

The 2016 Ram Cruise Control system may also need a software update in order to function properly. It is important to find the right software update for your vehicle, as well as verifying that the firmware version is up to date. This can help keep your system running smoothly and efficiently.

Dashboard Light Indicators

Finally, it is important to check for warning lights on your dashboard that may indicate a problem with the 2016 Ram Cruise Control system. Knowing what each colour coded controlling pattern means can help you diagnose any issues with your cruise control system quickly and efficiently.

FAQ & Answers

Q: What is Cruise Control?
A: Cruise control is an automated system that allows a vehicle to maintain a set speed. It is commonly used on highways and long trips to help reduce driver fatigue. The driver sets the desired speed, and the car will automatically accelerate or decelerate as needed to maintain that speed.

Q: What are the causes of cruise control not working?
A: There are various causes that can lead to cruise control not working. These can include faulty sensors, electrical connections that are not secured, vacuum leaks in hose connections or intakes, defective fuses or relays, and spark plugs or ignition cables that need to be replaced.

Q: What tools are needed to diagnose and replace parts related to cruise control?
A: To diagnose and replace parts related to cruise control issues, you will need a multi-meter tester tool or volt ohm meter as well as a car maintenance manual. In some cases, it may be necessary to have professional help in order to properly replace certain parts such as the throttle position sensor (TPS) and accelerator pedal position sensor (APPS).

Q: Does software updates help fix cruise control problems?
A: Software updates can sometimes help with cruise control problems. It is important to ensure that the firmware version of your vehicles software is up-to-date in order for the system to work properly. If you are unsure of which software update is right for your vehicle, consult your car maintenance manual or speak with a professional mechanic.

Q: What dashboard light indicators should I look for when troubleshooting cruise control issues?
A: When troubleshooting cruise control issues, you should check for any warning lights on your dashboard. The dashboard will usually display different colors depending on what type of issue you may have with your vehicle’s systems. It is important to know what each color means in order to properly diagnose the problem.

In conclusion, it is likely that the 2016 Ram Cruise Control system is not working due to a malfunction in the vehicles electrical system or a problem with the cruise control module. It is recommended that you take your vehicle to a qualified mechanic for further diagnosis and repair.

Similar Posts